|
Ergonomic, 37 inch working height. Electric blade and clamp drive. Electric back gauge drive with touchpad for easy programming. Front table digital display (cm or inches) with multilingual operator guidance. Digital display accurate to 1/10 mm or 1/100 inch. Stores 99 programs with up to 99 steps in each (up to 15 repeat cuts can be integrated as a single step). Pre-programmed for standard paper sizes.
Memory key for repeat cuts. Automatic SET function for reference measurement and EJECT function for pushing out paper. Self-diagnostic system with error indication on display. Electronic hand wheel with variable speed control for manual back gauge setting. Bright, LED optical cutting line. 3-step, LED front table illumination; Adjustable, spindle guided back gauge with narrow separations and plastic gliders. Dual side guides on front and rear tables. High quality, German steel blade. Solid steel blade carrier and adjustable blade guides. All-metal construction. Includes stand with storage shelf, easy-access tool holder, and paper blocking tool. Optional side tables increase work surface.
Cut Length: | 25 1/2" inches |
Capacity: | 3" |
Type: | Electric |
Narrow Cut: | 1" |
Depth Behind Knife: | 24" |
Motor: | 2 HorsePower |
Size: | 48" D x 39" W x 51" H (61 1/2" W with side tables) |
Warranty: | 1 Year |
Power: | 115 V, 60 Hz (20 amp dedicated line required) |
Shipping Weight: | 775 lbs. (795 lbs. with side tables) Pounds |
1 x 36" Rotatrim Rotary Paper Cutter | $559.00 |
1 x CombMac-24E Electric Comb Binding Equipment | $1,395.00 |
1 x GUIDE | $7.80 |
1 x FlexiCloser 2 Automatic Wire Closer | $1,825.00 |
1 x 18" x 500' 1.7 Mil Low Melt Laminating Roll Film | $96.72 |
1 x 18" (45cm) Safety Straight Edge | $84.30 |
1 x Ideal Triumph 3900 Cutting Knife | $228.00 |
1 x WirePro Advantage Duo | $699.00 |
1 x Onyx HD7700H Ultima Heavy Duty Electric Hole Punch for Comb, Wire, & Coil | $4,840.00 |
1 x 30" Rotatrim Rotary Paper Cutter | $489.00 |
1 x RENZ TC-20 Thumb Cut Paper Calendar Punch | $189.00 |
1 x 72" (180cm) Safety Straight Edge | $197.00 |
1 x WirePro 301 EPC 3:1 Heavy Duty Electric Punch Wire Binding Machine | $499.00 |
1 x TW-2100 Manual Wire Punch and Bind Machine | $459.00 |
1 x DocuGem R1800 18" Paper Cutter | $1,900.00 |
1 x HEAT SWITCH PRS311 PROFFESSOR | $40.17 |
1 x NONSTK-ROLL PIN, 7/32 X 1-1/8 | $22.93 |
1 x PUNCH PIN .156 3-1 AP1 | $89.84 |
1 x ROLL PIN, 3/32 X 5/8 | $21.09 |
1 x Martin Yale W30 30" Paper Cutting Machine | $559.00 |
1 x FLAT BELT DBM-500-12J-36260 DISCONTINUED | $99.59 |
1 x NONSTK-DEFEATURED CHIP20201V70535 | $658.20 |
1 x BACKGAUGE CLAMP #4655 | $65.36 |
1 x EBM-S Tabletop Paper Drill | $1,325.00 |
1 x Kolbus HD 151 (10 Hole) Cutting Knife | $330.00 |
1 x 90900273002 ENCODER | $2,056.93 |
1 x THRUST NIDDLE ROLL BEARING ASSY | $29.38 |
1 x 609050057GEAR MOTOR (120V) GIBM-11-6D | $53.52 |
1 x 90090260027 GAUGE | $114.61 |
1 x Sheridan HT Trimmer Cutting Knife | $404.00 |
1 x INTLCK SWITCH BRK FM | $27.08 |
1 x Martin Yale WC36 36" Paper Cutting Machine | $789.00 |
1 x Trans | $1,121.30 |
1 x ACTUATOR BRACKET,IM >USE 7700298 | $50.40 |
1 x LATCH, SPRING | $68.08 |
1 x Leather Luggage Strap | $45.50 |